Receive Management Information Registration

The procedure to register the Receive Management Information is as follows:

 

  1. On the System Configuration screen enter the File ID 'LOOPTEST' to be registered in ID or Host Name, use the up arrow key and the down arrow key to move the cursor to '2. Receive Management Information,' and then press the Enter key.

    The Receive Management Information Update screen appears.

  2. Enter the required information in each field.

    [Registration details]

    Field

    Set Value

    File ID

    LOOPTEST

    Receive File Name

    /usr/tmp/rcvdata

    Registration Mode

    R (replace)

    Error Handling

    K (keep)

    Receive Mode

    S (single receive)

    Generational Management

    N (none)

    Transfer Group ID

    grp01

    Other fields

    Default value

    Refer to the following for details on each field:

    HULFT10 for Linux/AIX Operation Manual : Receive Management Information List screen

                                                                                    
 <<Receive Management Information Update>>       Ctr+p: Copy        ESC: Cancel
                                                 Ctr+d: Delete      TAB: Select
                                                 Ctr+s: Switch Screen
 File ID            : LOOPTEST

 File Name          : /usr/tmp/rcvdata
 Owner Name         :                   Group Name         :
 Permission         : Read    Write   Execute  0/1:Clear/Set Permission
        Owner           1       1       0
        Group           1       1       0
        Other           1       1       0
 Registration Mode  : R (N:New Creation   R:Replace   M:Append)
 Error Handling     : K (D:Delete   K:Keep   R:Restore)
 Receive Mode       : S (S:Single   M:Multiple)
 Generation Mgmt    : N (N:Disabled Y:Enabled)  No. of Generations :
 EBCDIC Set         : 0 (0:AUT A:KN B:AL C:AC D:AP E:LOW F:EX G:NEC H:KX
                         I:CNX V:U1 W:U2 X:U3)
 Successful Job ID  :
 Unsuccessful Job ID:

 Comment :  LOOPTEST

    Screen 6.6 Receive Management Information Update Screen

    Note

    Change the value for Receive File Name to suit the environment of your system.

                                                                                    
 <<Receive Management Information Update>>             TAB: Select  ESC: Cancel
                               Ctr+g: Generate Cipher Key  Ctr+s: Switch Screen

 File ID            : LOOPTEST

 Notification       : T (T:Receive Completion  J:Successful Job Completion)

 Transfer Group ID  :grp01

 Verify Data        : 0 (0:No  1:Yes)
 Cipher Key : 









 Comment :  LOOPTEST

    Screen 6.7 Receive Management Information Update Screen (Extension)

  3. When input is complete, press the Enter key.

    You return to the System Configuration screen and registration is completed.

    To cancel registration, press the ESC key.