Send and Receive Settings

Use the up arrow key and the down arrow key to move the cursor to 4. Send and Receive Settings on the System Environment Settings screen and then press the Enter key.

The Send and Receive Settings screen appears.

On this screen, specify and check the following fields:

Encryption Scheme

When you use HULFT Cipher Option, Encryption Scheme (ciphertype) in the System Environment Settings must be set to '1.'

When you execute New Installation or Update Installation, this value is automatically set.

When you add or delete HULFT Cipher Option by updating the product key, this field is not automatically changed. Check if the field is set to "1" when you use HULFT Cipher Option. Check if it is set to "0" when you do not use them. If the setting value is inappropriate, modify it to the appropriate value.

                                                                                
                     <<Send and Receive Settings>>            ESC: Cancel
                                                              TAB: Select
                                                            Ctr+s: Switch Screen
 Encryption Scheme                      : 1 (0:1)
 Receive Open Mode                      : 1 (0:1)
 Transfer Group Check                   : 0 (0:1:2)
 Dynamic Parameter Specification        : 1 (0:1)
 Message Dynamic Parameter Specification: 3 (0:1:2:3)
 Receive Multiplex Level Over Retry     : 0 (0:1)
 Send Transfer Error Handling           : 0 (0:1)
 Criteria to Delete Resend Queue        : 1 (1:2)
 Receive File Max. Size                 : 0
 Local Host Name
  host01
 ------------------------------------------------------------------------------
 This field specifies the method of encryption.
 0: Use HULFT Encryption Scheme
 1: Incorporate encryption exit routine and use other encryption scheme
 Refer to Administration Manual for the details.



                                                                                

Local Host Name

Specify the local host name used by HULFT at the time of communication.

HULFT notifies the remote host of the host name that is set here as the local host name.

If you perform New Installation, by default this field uses the host name that is specified in the setup program.

If you want to change the setting, specify a host name within 68 alphanumeric characters.

After specifying the required fields, press the Enter key.

The settings are saved and the System Environment Settings screen appears.