Copying a record

The procedure for copying a record in the Transfer Group Information is as follows:

 

  1. On the System Configuration screen, select 5. Transfer Group Information.

    Press the Enter key without entering anything in the input-allowed field of the ID.

    The Transfer Group Information List screen appears.

  2. Enter "3" in input-allowed field of the ID that you want to copy, then press the Enter key.

    The Transfer Group Information Copy screen displays the values that have already been registered.

    When the screen appears, the input-allowed field of the Transfer Group ID is left blank.

  3. Enter a new ID for the Transfer Group ID.

  4. When you finish the value entry, press the Enter key.

    HULFT copies the record with the values that you entered, and returns to the Transfer Group Information List screen.

Note

To cancel the copying of a record in the Transfer Group Information while you are working with the screen, press F3 and return to the System Configuration screen.

To cancel copying a record in the Transfer Group Information and return to the previous screen, press F12 while you are operating the screen.

The Transfer Group Information List screen is composed of two subscreens. Pressing F11 or F23 toggles among the screens.

For details on the screen, refer to Screens for configuring the Transfer Group Information.