Receive Management Information registration
The procedure to register the Receive Management Information from the System Configuration screen is as follows:
1. Enter '2' for the OPTION field, enter 'LOOPTEST' in the ID field, and then press the Enter key.
2. The Receive Management Information Registration screen appears.
3. Enter a corresponding value in required fields as below:
- [Value to Be Registered]
-
Field
Value
File ID
LOOPTEST
Receive File Name
Work library name/LOOPRCV(LOOPRCV)
Transfer Group ID
GRP01
Other fields
Default value
Refer to the following for details on each field:
HULFT10 for IBMi Operation Manual :
F11/F23= Switch Screen
<<Receive Management Information Registration>> 1/2
File ID : LOOPTEST
Receive File Name : HULTEMP/LOOPRCV(LOOPRCV)
Record Length : 128
Registration Mode : R (N:New Creation R:Replace M:Append)
Error Handling : K (D:Delete K:Keep R:Restore)
Receive Mode : S (S:Single M:Multiple)
Generational
Management : N (N:Disable Y:Enable) No. of Generations : 0
EBCDIC Set : 0 (0:AUT A:KN B:AL C:AC D:AP E:LOW F:EX G:NEC H:KX
I:CNX V:U1 W:U2 X:U3)
Successful Job ID :
Unsuccessful Job ID:
Comment :
Screen 4.4 Receive Management Information Registration (1)
When you enter the receive file name, press F11 key or F23 key to switch to the next screen.
F11/F23= Switch Screen
<<Receive Management Information Registration>> 2/2
File ID : LOOPTEST
Notification : T (T:Receive Completion J:Successful Job Completion)
Transfer Group ID : GRP01
Verify Data : 0 (0:No 1:Yes)
Cipher Key :
Comment :
Screen 4.5 Receive Management Information Registration (2)
When the entry of the transfer group ID is complete, press the Enter key. The screen returns to the System Configuration screen to complete the registration. To stop the registration, press the F3 key.