Send job messages

START TIME=%s

DATE=%s START TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s

The send job has started.

START TIME=%s END TIME=%s RC=%04d

DATE=%s START TIME=%s END TIME=%s RC=%04d HOSTNAME=%s FILEID=%s:JNO=%s

The send job ended successfully.

START TIME=%s END TIME=%s RC=%04d

DATE=%s START TIME=%s END TIME=%s RC=%04d HOSTNAME=%s FILEID=%s:JNO=%s

The send job ended unsuccessfully.

TESTMODE START

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:TESTMODE START

The Send job has started in test operation.

START TIME=%s END TIME=%s RC=%04d TESTMODE SUCCESS

DATE=%s START TIME=%s END TIME=%s RC=%04d HOSTNAME=%s FILEID=%s:JNO=%s I:TESTMODE SUCCESS

The send job ended successfully in test operation.

START TIME=%s END TIME=%s RC=%04d TESTMODE FAILURE

DATE=%s START TIME=%s END TIME=%s RC=%04d HOSTNAME=%s FILEID=%s:JNO=%s W:TESTMODE FAILURE

The send job ended unsuccessfully in test operation.

JOB START TIME=%s JOB EXECUTION START

DATE=%s JOB START TIME=%s JOB EXECUTION START:JNO=%s

The post-send job started.

JOB END TIME=%s JOB EXECUTION NORMAL END

DATE=%s JOB END TIME=%s JOB EXECUTION NORMAL END:JNO=%s

The post-send job ended successfully.

JOB START TIME=%s JOB EXECUTION ERROR

DATE=%s JOB START TIME=%s JOB EXECUTION ERROR HOSTNAME=%s FILEID=%s:JNO=%s

Failed to execute the post-send Job.

JOB END TIME=%s JOB EXECUTION ABNORMAL END

DATE=%s JOB END TIME=%s JOB EXECUTION ABNORMAL END:JNO=%s

The post-send job ended unsuccessfully.

CODECHANGE ERROR ( INCODE=|%06X| )

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s E:CODECHANGE ERROR ( INCODE=|%06X| )

Failed to convert the character code because of the code that was output to the message.

COMMUNICATION ERROR. SPECIFIED SETTING IS NOT SUPPORTED BY REMOTE HOST. (FILEID)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s E:COMMUNICATION ERROR. SPECIFIED SETTING IS NOT SUPPORTED BY REMOTE HOST. (FILEID)

The send file ID exceeds 8 bytes. If HULFT on remote host is lower than Ver.8, the send file ID must be 8 bytes or less.

COMMUNICATION ERROR. SPECIFIED SETTING IS NOT SUPPORTED BY REMOTE HOST. (FMTID)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s E:COMMUNICATION ERROR. SPECIFIED SETTING IS NOT SUPPORTED BY REMOTE HOST. (FMTID)

The specified format ID has exceeded the maximum byte count. If HULFT on remote host is lower than Ver.8, the format ID in format transfer must be 8 bytes or less.

COMMUNICATION ERROR. SPECIFIED SETTING IS NOT SUPPORTED BY REMOTE HOST. (MFMTID)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s E:COMMUNICATION ERROR. SPECIFIED SETTING IS NOT SUPPORTED BY REMOTE HOST. (MFMTID)

The specified format ID has exceeded the maximum byte count. If HULFT on remote host is lower than Ver.8, the multi format ID in multi format transfer must be 8 bytes or less.

FAILED TO GET MSS.

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s E:FAILED TO GET MSS.

Failed to acquire the MSS.

APPLIED A FIXED VALUE TO TRANSFER UNIT.

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:APPLIED A FIXED VALUE TO TRANSFER UNIT.

HULFT uses the fixed value as the transfer block length and the transfer block count values.

AUTO RETRY WAITING

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:AUTO RETRY WAITING

HULFT is waiting for auto resending.

CALCULATED TRANSFER UNIT FROM MSS AUTOMATICALLY. MSS=%d, BLOCKLEN=%d, BLOCLCNT=%d

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:CALCULATED TRANSFER UNIT FROM MSS AUTOMATICALLY. MSS=%d, BLOCKLEN=%d, BLOCLCNT=%d

HULFT uses the size of the transfer unit that is calculated based on the acquired MSS.

HULFT RECONNECTS TO THE HOST OF LOWER VERSION USING HULFT7 COMMUNICATION MODE.

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:HULFT RECONNECTS TO THE HOST OF LOWER VERSION USING HULFT7 COMMUNICATION MODE.

HULFT will reconnect in HULFT7 communication mode, because the version of HULFT on the remote host is lower than Ver.8.

NOT SUPPORTED BY COUNTERPART. HULFT TRANSFERS DATA WITHOUT COMPRESSION.

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:NOT SUPPORTED BY COUNTERPART. HULFT TRANSFERS DATA WITHOUT COMPRESSION.

HULFT on the remote host does not support DEFLATE compression. HULFT transfers without compression.

RCVMAXOVER RETRY WAITING (CNT=%d)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:RCVMAXOVER RETRY WAITING (CNT=%d)

The host is in standby mode for retrying connection because the Receive Multiplex Level was exceeded.

REMOTE HOST IS HULFT VER.8 OR HIGHER, BUT HULFT7 COMMUNICATION MODE IS USED.

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:REMOTE HOST IS HULFT VER.8 OR HIGHER, BUT HULFT7 COMMUNICATION MODE IS USED.

HULFT on the remote host is higher than Ver.8, however, it connects using a downward-compatible communication method (HULFT7 Comm. Mode).

SPEED PRIORITY MODE CANNOT BE USED

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:SPEED PRIORITY MODE CANNOT BE USED

Speed priority mode cannot be used because it is not set in the remote host.

THE SOCKET BUFFER USES THE VALUE SET WITH THE SYSTEM. (RCVBUF=%d)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:THE SOCKET BUFFER USES THE VALUE SET WITH THE SYSTEM. (RCVBUF=%d)

The socket communication is performed as the receiving size set in the environment in which HULFT is used (OS).

THE SOCKET BUFFER USES THE VALUE SET WITH THE SYSTEM. (SNDBUF=%d)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:THE SOCKET BUFFER USES THE VALUE SET WITH THE SYSTEM. (SNDBUF=%d)

The socket communication is performed as the sending size set in the environment in which HULFT is used (OS).

THE SPECIFIED OPTION IS UNAVAILABLE. HULFT TRANSFERS DATA WITHOUT COMPRESSION.

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s I:THE SPECIFIED OPTION IS UNAVAILABLE. HULFT TRANSFERS DATA WITHOUT COMPRESSION.

HULFT transfers by changing the Compression Preference from "3" (DEFLATE) to "N" (None), because HULFT on the remote host is lower than Ver.8.

RECEIVING-SIDE HOST DOES NOT SUPPORT INSTANT TRANSFER (RECEIVING-SIDE HOST: %s)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s E:RECEIVING-SIDE HOST DOES NOT SUPPORT INSTANT TRANSFER (RECEIVING-SIDE HOST: %s)

HULFT transfers by changing the Compression Preference from "3" (DEFLATE) to "N" (None), because HULFT on the remote host is lower than Ver.8.

CODE CONVERTING SIDE IS BEING SWITCHED FROM SENDING SIDE TO RECEIVING SIDE

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s W:CODE CONVERTING SIDE IS BEING SWITCHED FROM SENDING SIDE TO RECEIVING SIDE

HULFT switches the conversion side from sending side conversion to receiving side conversion.

CODE CONVERTING SIDE IS BEING SWITCHED FROM RECEIVING SIDE TO SENDING SIDE

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s W:CODE CONVERTING SIDE IS BEING SWITCHED FROM RECEIVING SIDE TO SENDING SIDE

HULFT switches the conversion side from receiving side conversion to sending side conversion.

NOT SUPPORTED BY REMOTE HOST. HULFT DISABLES THE SPECIFIED SETTING. (MSGL%d)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s W:NOT SUPPORTED BY REMOTE HOST. HULFT DISABLES THE SPECIFIED SETTING. (MSGL%d)

The specification of long messages is ignored, because HULFT on the remote host is lower than Ver.8.

USER EXIT FINISH ERROR(%d)

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s W:USER EXIT FINISH ERROR(%d)

Error occurred while finishing the encryption routine.

NOT SUPPORTED BY COUNTERPART. HULFT ENCRIPTION SCHEME IS USED FOR TRANSFER.

DATE=%s TIME=%s HOSTNAME=%s FILEID=%s:JNO=%s W:NOT SUPPORTED BY COUNTERPART. HULFT ENCRIPTION SCHEME IS USED FOR TRANSFER.

HULFT on the remote host does not support AES cipher. HULFT cipher is used for the transfer.