Various codes
Status codes and detail codes of hubmgrd
The table below shows a list of status codes and detail codes that are returned when registering and updating HULFT system management information, sending and receiving issue requests, and confirming send or receive log by using HULFT-HUB Server.
Table C.6 Status codes and Detail codes of hubm
|
Status code |
Detail code |
Cause |
Measure |
|---|---|---|---|
|
0001 |
0000 |
There is no relevant information in the log file or the management information file. |
1) Check the search conditions for the log records. 2) Register the management information record. |
|
0005 |
0001 |
The relevant information exists on HULFT-HUB Server. |
Refresh the information. |
|
0002 |
It is already registered. |
Refresh the information. |
|
|
0003 |
Deletion is not possible because it is currently in use in other management information. |
Delete the related management information records. |
|
|
0006 |
0000 |
The deletion failed because a user is logged in. |
Check the environment. |
|
0011 |
0001 |
The user ID is invalid. |
Check the user ID. |
|
0002 |
The user ID length is invalid. The setting of the Min. Number of Characters for User ID (UserIDMinLength) in the System Environment Settings of HULFT-HUB Server may have been modified after the registration of user information. |
Check the Min. Number of Characters for User ID (UserIDMinLength) in the System Environment Settings of HULFT-HUB Server. |
|
|
0012 |
0001 |
The password is invalid. |
Check the password. |
|
0002 |
The password length is invalid. The setting of the Min. Number of Characters for Password (PasswordMinLength) in the System Environment Settings of HULFT-HUB Server may have been modified after the registration of user information. |
Check the Min. Number of Characters for Password (PasswordMinLength) in the System Environment Settings of HULFT-HUB Server. |
|
|
0013 |
0000 |
The password has expired. |
Check the user information of the relevant user. |
|
0014 |
0000 |
The account is disabled. |
Check the user information of the relevant user. |
|
0015 |
0001 |
The host type that is registered on HULFT-HUB Server for the client is different from the actual host type of the client. |
Check the environment of the client side, select the relevant client on the Management screen, and acquire the management information. |
|
0002 |
The host type of the client that you tried to operate in HULFT-HUB Manager is different from the host type of the client that is registered on HULFT-HUB Server. |
Refresh the information. |
|
|
0016 |
0001 |
The version that is registered on HULFT-HUB Server for the client is different from the actual version of the client. |
Check the environment of the client side, select the relevant client on the Management screen, and acquire the management information. |
|
0002 |
The version of the client that you tried to operate in HULFT-HUB Manager is different from the version of the client that is registered on HULFT-HUB Server. |
Acquire the management information for the relevant client. Check the version of the client side and the version in HULFT-HUB Manager. If the version of the client side is the same as the version in HULFT-HUB Manager, close the screen and try the processing again. |
|
|
0017 |
0000 |
The Installation Information that is registered on HULFT-HUB Server for the client is different from the actual Installation Information of the client. |
Check the environment of the client side, select the relevant client on the Management screen, and acquire the management information. |
|
0018 |
0000 |
The System Environment Settings of the client that you tried to operate in HULFT-HUB Manager are different from the System Environment Settings of the actual client. One or more of the following may have been modified on the client side: the Receive Port No., the Request Acknowledge Port No., the Kanji Code Type, or the JIS Year. |
Check the environment of the client side, select the relevant client on the Management screen, and acquire the management information. |
|
0022 |
0001 |
The product type that is registered on HULFT-HUB Server for the client is different from the actual product type of the client. |
Check the environment of the client side, select the relevant client on the Management screen, and acquire the management information. |
|
0002 |
The product type of the client that you tried to operate in HULFT-HUB Manager is different from the product type of the client that is registered on HULFT-HUB Server. |
Refresh the information. |
|
|
0003 |
Registration of the client failed. A client for which Forced Strong Key mode is enabled cannot be registered to a HULFT-HUB Server that does not have Cipher Option. |
None |
|
|
0023 |
0000 |
HULFT main module is not installed on the client. The products that are installed may all be option products. |
Check the installation environment of the client side. |
|
0001 |
You cannot log in to HULFT-HUB Server because the server is a higher version. |
None |
|
|
8000 |
0000 |
The trial period for the Trial version of HULFT-HUB Server has expired. |
Migrate HULFT-HUB Server to the Product version. |
|
8001 |
0003 |
A data access error occurred on the client. |
Refer to the console and Detail codes of the client side, remove the cause of the error, and try again. |
|
0004 |
A memory error occurred on the client. The memory is insufficient. |
Wait for a while and try again. |
|
|
0005 |
A file open error occurred on the client. |
The cause may be lack of permissions, or another issue. Check the environment. |
|
|
0006 |
A security error occurred on the client. You do not have the permissions to perform operations on the log files and the management information files. |
Specify the appropriate permissions to perform operations on the log files and the management information files on the client. |
|
|
0007 |
Issuance of the command failed on the client. |
Check each process to ensure it is running correctly on the client side. |
|
|
0008 |
The deletion failed on the client. The relevant information record does not exist or the file is corrupt. |
1) Check if the relevant information record exists on the client. 2) Check the installation environment. |
|
|
0009 |
The Send processing or the Receive processing failed. |
Check each process to ensure it is running correctly on the client side. |
|
|
0010 |
Issuance of the request failed on the client. The specified file ID or host name may not exist. All the processes may not be running on the client side. |
1) Check the file ID and the host name. 2) Check each process to ensure it is running correctly on the client side. |
|
|
0011 |
The user ID or the password is invalid. The user ID or the password for login is incorrect. |
Check the user ID and the password. |
|
|
0099 |
A system error occurred on the client. |
Check the environment of the client. |
|
|
8961 |
An error occurred during receiving on HULFT-HUB Server. |
1) Check if the Request Acknowledge process on the client is running, and if all HULFT-HUB Server on the route are running. 2) Check if a network failure has occurred. |
|
|
8962 |
A framed message that is not recognized by HULFT-HUB Server has been received. An application other than HULFT or HULFT-HUB Manager may have connected to HULFT-HUB Server. |
1) Check that the port numbers that other applications use are not the same as the port number of HULFT-HUB Server. 2) If the client is running on the same machine as HULFT-HUB Server, check that the port number of HULFT-HUB Server is not the same as the Receive Port No. or the Request Acknowledge Port No. of the client. |
|
|
8001 |
8963 |
1) The processing of the Request Acknowledge process was cancelled on the client. Or, the Relay processing was cancelled on HULFT-HUB Server during the relay of the management connection. 2) HULFT Manager Connection Option is not installed on the client. 3) In the System Environment Settings of the client, Forced Strong Key Mode is specified as "Enabled". |
1) Check the console and Detail codes of the client side or check the trace log of HULFT-HUB Server through which the data is sent. 2) Install HULFT Manager Connection Option on the client. 3) You cannot connect to a client in which Forced strong Key Mode is specified as "Enabled". |
|
8964 |
Sending of a framed message from HULFT-HUB Server failed. |
1) Check if the client is running. This problem may occur if the client is stopped forcibly during processing by a termination command or such, depending on the timing. Restart the Request Acknowledge process on the client. 2) Troubleshoot the problem according to the error messages in the trace log of HULFT-HUB Server. |
|
|
8965 |
A parameter error occurred during sending on HULFT-HUB Server. |
The system is unstable. Restart HULFT-HUB Server. |
|
|
8966 |
The version of the client is not supported. You cannot specify connection with HULFT Ver.4 or lower client. HULFT-HUB system does not support HULFT Ver.4 or lower clients. |
Upgrade the version of the client. |
|
|
8967 |
The client is not supported. You cannot specify connection with HULFT for Fujitsu K Series. HULFT-HUB system does not support this type of client. |
None |
|
|
From 8968 to 8987 |
Sending or receiving failed. An error occurred during communication with the client or the neighboring HULFT-HUB Server, and sending or receiving failed on HULFT-HUB Server. |
1) Check if the client is running. This problem may occur if the client is stopped forcibly during processing by a termination command or such, depending on the timing. Restart the Request Acknowledge process on the client. 2) Troubleshoot the problem according to the error messages in the trace log of HULFT-HUB Server. |
|
|
From 8988 to 8990 |
Reading of files on the client side failed. |
The cause may be lack of permissions, or another issue. Check the environment. |
|
|
From 8991 to 8996 |
Sending or receiving failed. An error occurred during communication with the client or the neighboring HULFT-HUB Server, and sending or receiving failed on HULFT-HUB Server. |
1) Check if the client is running. This problem may occur if the client is stopped forcibly during processing by a termination command or such, depending on the timing. Restart the Request Acknowledge process on the client. 2) Troubleshoot the problem according to the error messages in the trace log of HULFT-HUB Server. |
|
|
8997 |
A logout error has occurred. Post-processing failed on HULFT-HUB Server during logout processing in HULFT-HUB Manager. |
Check the trace log of HULFT-HUB Server that is displayed on the Structure Diagram of the Management screen to identify the server on which the error occurred, and troubleshoot the problem. |
|
|
8001 |
8998 |
A time-out error occurred. Connection to the request destination client failed. |
1) Check if the Request Acknowledge process on the client is running, and if all HULFT-HUB Server on the route are running. 2) Check if a network failure has occurred. |
|
8999 |
A connection error occurred. Connection to the request destination client failed. Or, the client definition on HULFT-HUB Server is different from the actual information on the client side. |
Check if the Request Acknowledge process on the client is running, and if all HULFT-HUB Server on the route are running. Or, check the environment of the client side, and if necessary, select the relevant client on the Management screen and acquire the management information. |
|
|
Others |
An error occurred on the client. |
The Error code that is sent from the client is displayed. Refer to "Error Codes and Messages" for the client and remove the cause of the error. |
|
|
8003 |
0070 |
The data specified has exceeded the valid size due to multibyte characters. |
Ensure that the size of the specified data conforms to the valid size range after being encoded by the code set used in HULFT on destination host. |
|
9998 |
XXXX |
A management information access error occurred. The file is corrupt, or the environment is invalid. The error code sent from the database is displayed as the Detail code. |
Check the trace log of HULFT-HUB Server that is displayed on the Structure Diagram of the Management screen to identify the server on which the error occurred, and check the installation environment. |
Management information type
The table below shows a list of management information types.
Table C.7 List of management information types
|
Management information type |
Management information |
|---|---|
|
0 (zero) |
System Environment Settings |
|
S |
Send Management Information |
|
R |
Receive Management Information |
|
J |
Job Information |
|
T |
Transfer Group Information |
|
H |
Host Information |
|
F |
Format Information |
|
M |
Multi Format Information |
|
L |
Mail Interface Information |
|
K |
Schedule Information |
|
X |
XML Conversion Information |
Status code
|
Status code |
Cause |
Measure |
|---|---|---|
|
11 |
The user ID is invalid. |
Correct the user information used for logging in to HULFT-HUB Server, and then try again. |
|
12 |
The password is invalid. |
Correct the user information used for logging in to HULFT-HUB Server, and then try again. |
|
13 |
The password has expired. |
Check the user information of the login user with the system administrator. |
|
14 |
The account is disabled. |
Check the user information of the login user with the system administrator. |
|
8000 |
The trial period for the Trial version has expired. |
Upgrade the program to the product version. |
|
9998 |
A management information access error occurred. The file is corrupt, or the environment is invalid. |
Check the installation environment. |