Messages related to accumulation (7001 to 8000)
- 7001E:
-
Unable to accumulate data because accumulation is blocked. : Host name (%s), Service name (%s)
- Description :
-
The data that was received from the host name or service name could not be accumulated because the accumulation block threshold has been exceeded.
- Measure :
-
On the Accumulation Environment Settings screen of HULFT-HUB Manager, increase the capacity of the accumulation block threshold for the whole server or by host, or delete the accumulated data.
- 7002E:
-
Unable to accumulate data because the maximum size of Accumulated Data by host is exceeded. : Host name (%s), Service name (%s), Max. file size (%s)
- Description :
-
The data received from the host name (%s) and service name (%s) could not be accumulated because the file size exceeded the maximum size of Accumulated Data by host.
- Measure :
-
On the Accumulation Environment Settings screen of HULFT-HUB Manager, set the size of Max. Capacity for Accumulation by host to '0,' or increase the upper limit of the Max. Capacity for Accumulation.
- 7003E:
-
Unable to accumulate data because the number of generation files of the undelivered file exceeds the Limit to the Number of Undelivered Generations. : Host name (%s), Service name (%s), File ID (%s), Generation file count (%s)
- Description :
-
The data that was received from the host name or the service name could not be accumulated because the number of generation files of the undelivered file exceeded the Limit to the Number of Undelivered Generations.
- Measure :
-
Send or delete the undelivered accumulated data that is indicated by the sending host name, the service name, and the file ID.
- 7004E:
-
Unable to accumulate data because the accumulation capacity is exceeded. : Host name (%s), Service name (%s), Allowable capacity (%s), Used capacity (%s), Expected capacity (%lld)
- Description :
-
The data received from the host name (%s) and service name (%s) could not be accumulated because the accumulation block threshold value was exceeded.
- Measure :
-
On the Accumulation Environment Settings screen of HULFT-HUB Manager, increase the capacity of the accumulation block threshold for the whole server or by host, or delete the accumulated data.
- 7006E:
-
Failed to open the Accumulated file. File name: %s, Reason: %s
- Description :
-
Due to the reason (%s), an attempt to open the file (%s) failed.
- Measure :
-
Remove the cause that is indicated by the reason.
- 7007E:
-
Failed to write the Accumulated file. Reason: %s
- Description :
-
Due to the reason (%s), an attempt to write data to the file failed.
- Measure :
-
Remove the cause that is indicated by the reason.
- 7008E:
-
Failed to read the Accumulated file. Reason: %s
- Description :
-
Due to the reason (%s), an attempt to read the file failed.
- Measure :
-
Remove the cause that is indicated by the reason.
- 7010E:
-
An internal error has been detected.
- The internal flag that was set when the Accumulated file was created has an unexpected value.
- Unable to find the setting for the file pointer when writing data for the Accumulated file.
- Unable to find the setting for the file pointer when rewriting the H framed message for the Accumulated file.
- The internal flag that was set when the Accumulation Status DB was reserved has an unexpected value.
- The internal flag that was set when a Z framed message was received and the Accumulation Status DB was updated, has an unexpected value.
- Failed to acquire the transfer status (receiving side) when accumulation was completed.
- Failed to acquire the transfer status (sending side) when accumulation was completed.
- Inconsistency between the transfer status and the Accumulation Status DB was detected when accumulation was completed.
- An invalid accumulation condition was detected when accumulation was completed.
- Failed to calculate the scheduled deletion date when accumulation was completed.
- The internal flag that was set when a D framed message was received has an unexpected value.
- Description :
-
An attempt to create an Accumulated file failed due to a system error.
- Measure :
-
--
- 7011E:
-
A system error has been detected. Failed to allocate the space for the Accumulation Status (slave) data.
- Description :
-
An attempt to allocate memory failed.
- Measure :
-
This problem might occur when the load on the system is temporarily high. Wait for a while, and then try again.
- 7012E:
-
Failed to create the directory. Directory name: %s Reason: %s
- Description :
-
Due to the reason (%s), an attempt to create a directory failed.
- Measure :
-
Remove the cause that is indicated by the reason.
- 7013E:
-
Failed to acquire file information. File name: %s, Reason: %s
- Description :
-
Due to the reason (%s), an attempt to acquire the file information of the file (%s) failed.
- Measure :
-
Remove the cause that is indicated by the reason.
- 7015E:
-
- Unable to find the setting for the cipher key.
- Failed to initialize HULFT cipher processing.
- Failed to initialize the user cipher.
- Failed to decrypt HULFT cipher.
- Failed to decrypt the user cipher.
- Description :
-
An abnormality occurred in encryption/decryption processing.
- Measure :
-
On the Transfer Information screen of HULFT-HUB Manager, ensure that the cipher key is correctly set.
- 7016E:
-
- Failed to decompress horizontal compression.
- Failed to decompress vertical compression.
- Failed to decompress DEFLATE compression.
- Failed to decompress data compressed with Zstandard compression.
- Description :
-
An attempt to decompress the compressed data failed.
- Measure :
-
An inconsistency might have occurred in the Transfer definition. On the Transfer Information screen of HULFT-HUB Manager, check the Transfer definition, such as the cipher key.
- 7017E:
-
- An error was detected during the analysis of the received framed message. Failed to analyze a D framed message.
- An error was detected during the analysis of the received framed message. Detected an unknown compression preference.
- Description :
-
An error was detected during the analysis of the framed message.
- Measure :
-
Check whether the communication target is a product that HULFT-HUB Server supports, and whether there is any problem on the communication target side.
- 7018E:
-
The Deliver processing was cancelled because the transfer multiplex level (%d) was exceeded. Transfer serial ID: %s, File ID: %s, Send host name: %s, Send service name: %s, Receive host name: %s, Receive service name: %s
- Description :
-
New Deliver processing was cancelled because the Relay/Multicasting/Deliver processing reached the value of the Transfer Processing Multiplex Level (TransRlyMax) in the System Environment Settings.
- Measure :
-
If you want simultaneous delivery, change the value of the Transfer Processing Multiplex Level (TransRlyMax) in the System Environment Settings.
- 7019E:
-
- Failed to compress data with DEFLATE compression.
- Failed to compress data with Zstandard compression.
- Description:
-
Failed to compress data.
- Measure:
-
HULFT-HUB Server is in an unstable state. Check the environment.
- 7031E:
-
Failed to acquire file information. File name: %s, Reason: %s
- Description :
-
Due to the reason (%s), an attempt to acquire the file information of the file (%s) failed.
- Measure :
-
Remove the cause that is indicated by the reason.
- 7032E:
-
The Accumulated file does not exist. File name: %s
- Description :
-
The Accumulated file (%s) does not exist.
- Measure :
-
HULFT-HUB Server is in an unstable state. Check the environment.
- 7033E:
-
The Accumulated file is not a usual file. File name: %s
- Description :
-
The Accumulated file (%s) is invalid.
- Measure :
-
Check the invalid Accumulated file.
- 7034E:
-
The size of the Accumulated file is different from the size when Accumulation was carried out. File name: %s Size at accumulation: %d Current size: %d
- Description :
-
The Accumulated file (%s) is invalid.
- Measure :
-
Check the invalid Accumulated file.
- 7035E:
-
Failed to open the Accumulated file. File name: %s, Reason: %s
- Description :
-
An attempt to open the Accumulated file (%s) failed.
- Measure :
-
A possible cause is a lack of access permissions for a file or directory. Ensure that the executor of HULFT-HUB Server has required permissions, and restart HULFT-HUB Server.
- 7036E:
-
Failed to read the Accumulated file.
- Description :
-
An attempt to read the Accumulated file failed.
- Measure :
-
A possible cause is a lack of access permissions for a file or directory. Ensure that the executor of HULFT-HUB Server has required permissions, and restart HULFT-HUB Server.
- 7037E:
-
- An error was detected in a framed message format in an Accumulated file. File name: %s Framed message type: %c
- The first framed message type of an Accumulated file is not @, F, or T. File name: %s Framed message type: %c
- No E framed message exists in an Accumulated file. File name: %s
- Description :
-
The Accumulated file data is invalid.
- Measure :
-
Delete the Accumulated file, and then retry the accumulation.
- 7038E:
-
- An error was detected during the analysis of the accumulated data. Detected an unknown cipher scheme. Value: 0x%02x
- An error was detected during the analysis of the received framed message. Detected an unknown cipher scheme. Value: 0x%02x
- Description :
-
An error was detected during the analysis of the accumulated data or the framed message.
- Measure :
-
Check whether the communication target is a product that HULFT-HUB Server supports, and whether there is any problem on the communication target side.
- 7041I:
-
Acknowledged a termination instruction.
- Description :
-
A termination instruction by the termination command was acknowledged.
- Measure :
-
--
- 7042I:
-
Acknowledged a cancellation request.
- Description :
-
A cancellation request for delivery from HULFT-HUB Manager was acknowledged.
- Measure :
-
--
- 7043E:
-
An error has been detected in a framed message sequence. Sent framed message type: %c Received framed message type: %c
- Description :
-
The framed message sequence is not supported by HULFT-HUB Server.
- Measure :
-
Check whether the communication target is a product that HULFT-HUB Server supports, and whether there is any problem on the communication target side.
- 7044E:
-
Failed to analyze the received framed message. Received framed message type: %c
- Description :
-
An attempt to analyze the received framed message (%c) failed.
- Measure :
-
Check whether the communication target is a product that HULFT-HUB Server supports, and whether there is any problem on the communication target side.
- 7045I:
-
An Accumulated file has exceeded the storage period.
- Description :
-
The Accumulated Data Deletion process will delete the accumulated files for which the storage period expired.
- Measure :
-
--
- 7046I:
-
Cancellation processing is pending and waiting for a response from the receiving side.
- Description :
-
An instruction to cancel delivery was received, but the cancellation processing is pending and waiting for a response from the receiving side.
- Measure :
-
--
- 7047I:
-
The accumulated data was deleted because the stored generation file count has been exceeded. File ID: %s, Storage start date/time %s Storage end date/time %s
- Description :
-
The accumulated data was deleted because the stored generation file count has been exceeded.
- Measure :
-
--
- 7049E:
-
An error occurred during data verification.
- Description :
-
An error occurred during data verification.
- Measure :
-
Some of this transfer data might be lost during communication.
Check the network status, and then retry.
- 7050I:
-
The accumulation is complete. File ID: %s, Send host name: %s, Send service name: %s
- Description :
-
The accumulation processing is complete.
- Measure :
-
--
- 7051E:
-
The accumulation failed. File ID: %s, Send host name: %s, Send service name: %s
- Description :
-
The accumulation processing was interrupted because a problem occurred during the transmission or when the accumulated files were accessed.
- Measure :
-
--
- 7053E:
-
An error has been detected in the common library. Failed to confirm the end of the process.
- Description :
-
An error was detected in the common library. Failed to confirm the end of the process.
- Measure :
-
A possible cause is an abnormality in the operating system. Check the environment.
- 7054E:
-
Unable to delete the Accumulated file because this server is an alternative server.
- Description :
-
Unable to delete the Accumulated file because this server is an alternative server.
- Measure :
-
--
- 7055E:
-
The number of records or the data size received from the sending side is not consistent with the received content. File ID: %s, Send host name: %s, Send service name: %s
- Description :
-
The number of records (or the data size for binary transfer) of the transfer data is not consistent between the actual data and the reported information.
- Measure :
-
If an encryption method other than HULFT is used, ensure that the cipher key is correctly set in the Send Management Information and Transfer Information.
- 7056E:
-
Interrupted the delivery processing because the Forced Strong Key mode of the receiving host (%s:%s) is different.
- Description :
-
The delivery processing was interrupted because the Forced Strong Key mode of the receiving host is different from that of the Accumulated file.
- Measure :
-
Check whether the Forced Strong Key mode of the receiving host is the same as that of the sending host at the time of accumulation.