Format of Send Management Information

This topic explains the format of the Send Management Information.

For details of each field, refer to the linked explanation.

The following are notes about 'Field Name in Management Information Reference' in the table:

• A field with (*1) is used during distribution by the Collecting and Distributing System Management Information function. Refer to Fields that are Used during Distribution below the table.
• A field with (*2) is not currently used in HULFT-HUB.
• A field with (*3) was used in versions lower than HULFT Ver.7.0. Although this field is retained for backward compatibility, you cannot specify it in HULFT7 and higher.

 

50 columns (Column 1 is always 'send')

Column	Title (English)	Field Name in Management Information Reference	Specification for Each Distribution Destination Host Type
			HULFT7				HULFT8				HULFT10
			Mainframe	UNIX	Windows	i5OS	Mainframe	UNIX	Windows	IBMi	Mainframe	Linux	Windows	IBMi
1	send-title	-	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
2	ClientName	Distribution Destination Client Name (*1)	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
3	ClientServiceName	Distribution Destination Client Service Name (*1)	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
4	FileID	File ID	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
5	DispName	File Alias	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
6	SendFileNameUX	File Name	-	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-
7	SendFileNameNT	File Name	-	-	✓✓	-	-	-	✓✓	-	-	-	✓✓	-
8	SendFileNameAS	File Name	-	-	-	✓✓	-	-	-	✓✓	-	-	-	✓✓
9	DataSetName	Mainframe DSN	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-	-
10	Volume	Volume Serial	✓	-	-	-	✓	-	-	-	✓	-	-	-
11	TransferType	Transfer Type	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
12	Comment	Comment	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
13	Priority	Transfer Priority	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
14	Interval	Transfer Interval	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
15	TransferBlockCount	Transfer Block Count	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
16	TransferBlockLength	Transfer Block Length	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
17	CompressionPreference	Compression Preference	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
18	DatabaseID	Interface DBID	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
19	NormalJobID	Successful Job ID	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
20	CodeType	(*2)	-	-	-	-	-	-	-	-	-	-	-	-
21	Capacity	Capacity	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-	-
22	FirstExtent	1ST Extent	✓	-	-	-	✓	-	-	-	✓	-	-	-
23	Secondary	Secondary	✓	-	-	-	✓	-	-	-	✓	-	-	-
24	TransferGroupID	Transfer Group ID	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
25	MultiFormatID	Format/Multi Format ID	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
26	AbnormalJobID	Unsuccessful Job ID	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
27	CodeChange	Code Conversion	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
28	WorkVolume	Work Volume Serial	✓	-	-	-	✓	-	-	-	✓	-	-	-
29	FileClear	Send File Mode	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
30	CodeKey	Cipher Key	✓	✓	✓	✓	‡	‡	‡	‡	‡	‡	‡	‡
31	Exchanger	Interfacing with Exchanger	-	✓	-	-	-	-	-	-	-	-	-	-
32	TransferMethod	Transfer Mode	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-	-
33	UnitQuantity	UNIT Quantity	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-	-
34	EBCDICCodeSet	Lower than Ver.8.1: EBCDIC Code Set Ver.8.1 or higher: EBCDIC Set	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
35	CompressLevelUX	Compression Unit	-	✓	-	-	-	✓	-	-	-	✓	-	-
36	CompressLevelNT	Compression Unit	-	-	✓	-	-	-	✓	-	-	-	✓	-
37	ShiftCodeTypeMF	Shiftcode Mode	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-	-
38	ShiftCodeTypeUX	Shiftcode Mode	-	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-
39	ShiftCodeTypeNT	Shiftcode Mode	-	-	✓✓	-	-	-	✓✓	-	-	-	✓✓	-
40	ShiftCodeTypeAS	Shiftcode Mode	-	-	-	✓✓	-	-	-	✓✓	-	-	-	✓✓
41	FrontJob	Pre-send Job ID	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
42	MailID	Mail Interface ID	-	-	✓	-	-	-	✓	-	-	-	✓	-
43	EndCharCutMF	Subsequent Character	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-	-
44	EndCharCutAS	Subsequent Character	-	-	-	✓✓	-	-	-	✓✓	-	-	-	✓✓
45	Unit	UNIT	✓	-	-	-	✓	-	-	-	✓	-	-	-
46	OrderNumber	Sequence Number	✓	-	-	-	✓	-	-	-	✓	-	-	-
47	SndRdw	Sending with RDW	✓✓	-	-	-	✓✓	-	-	-	✓✓	-	-	-
48	CompressMode	Compression Mode	-	-	-	-	-	✓	✓	✓	-	✓	✓	✓
49	BusinessGroupID	Business Group ID	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓
50	ProcessMode	Processing Mode (*1)	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓	✓✓

✓✓: A string is required for import.

✓: A string is optional for import (specify "" to omit the field).

‡: A string is required for import if you set 'Enabled' for the Forced Strong Key Mode on the client; if you set 'Disabled', a string is optional (specify "" to omit the field).

-: A string is not necessary for import (specify ""). "" is also output for export.

[Note]

If you set an inappropriate value for the Cipher Key, '% ERROR' is output when you export the information. In such a case, importing is not possible. Change the setting to an appropriate value. If the client is running HULFT Ver.8.4 or higher, the value that can be set for the Cipher Key changes depending on the setting for the Forced Strong Key Mode on the client. For details, refer to the description on the Send Management Information for the relevant host type in Management Information Reference.

Fields that are Used during Distribution

Distribution Destination Client Name

Distribution Destination Client Service Name

Processing Mode