Host Information
This topic explains how to register detailed information for the host on the sending side and the host on the receiving side.
When you add a Transfer definition, HULFT-HUB Manager automatically generates the Host Information from the Registered Client Information of the clients in HULFT-HUB system (the clients on the Structure Diagram on the Management screen) and registers the information.
You can view and modify this information on the following screens:
- Register Host Information/Modify Host Information Record screen
- Collecting and Distributing System Management Information screen
You can also import and export this information on the following screen:
- Collecting and Distributing System Management Information screen
List of Fields
1. Basic Settings
<Table> List of Fields for Host Management Information (Basic Settings)
| No. | Field Name | Default Value | Setting Value | Specification | Remarks | Update | Distribute |
|---|---|---|---|---|---|---|---|
| A1 | Host Name | Alphanumeric characters and specific symbols *2 | Mandatory | Within 68 bytes (starting with an alphabetic character) | ✓ | ✓ | |
| A2 | Host Type | AS/400 | *1 | Mandatory | ✓ | ✓ | |
| A3 | Kanji Code Type | IBM Kanji | *1 | Mandatory | ✓ | ✓ | |
| A4 | JIS Year | 83JIS | *1 | Mandatory | ✓ | ✓ | |
| A5 | Receive Port No. | 30000 | From 1 to 65535 | Mandatory | ✓ | ✓ | |
| A6 | Request Acknowledge Port No. | 31000 | From 1 to 65535 | Mandatory | ✓ | ✓ | |
| A7 | Connection Type | LAN | LAN | Mandatory | ✓ | ✓ | |
| A8 | Send Process Multiplex Level by Host | 0 | From 0 to 99999 | Optional | ✓ | ✓ | |
| A9 | Comment | Alphanumeric characters | Optional | Within 60 bytes | ✓ | ✓ |
| *1: | When you configure settings on the screen, select an option from the list that is shown on the screen. |
| *2: | The only symbols allowed are '-' (hyphen) and '.' (period). However, whenever you register a definition of transfer via HULFT-HUB Server, host names that use an '_' (underscore) are automatically created in order to identify the hosts. For details about host names on constituent hosts, refer to HULFT-HUB Manual. |
2. Internet
<Table> List of Fields for Host Management Information (Internet)
| No. | Field Name | Default Value | Setting Value | Specification | Remarks | Update | Distribute |
|---|---|---|---|---|---|---|---|
| B1 | Local Net Proxy Server Name | Alphanumeric characters and specific symbols *1 |
Optional | Within 68 bytes (starting with an alphabetic character) | ✓ | ✓ | |
| B2 | Local Net Proxy Port No. | From 1 to 65535 | Optional | ✓ | ✓ | ||
| B3 | Global Net Proxy Server Name | Alphanumeric characters and specific symbols *1 |
Optional | Within 68 bytes (starting with an alphabetic character) | ✓ | ✓ | |
| B4 | Global Net Proxy Port No. | From 1 to 65535 | Optional | ✓ | ✓ |
| *1: | The only symbols allowed are '-' (hyphen) and '.' (period). |
3. Security
<Table> List of Fields for Host Information (Security)
| No. | Field Name | Default Value | Setting Value | Specification | Remarks | Update | Distribute |
|---|---|---|---|---|---|---|---|
| C1 | Allow Send Request/Resend Request | Yes | *1 | Mandatory | ✓ | ✓ | |
| C2 | Allow to View Post-receive Job Result | Yes | *1 | Mandatory | ✓ | ✓ | |
| C3 | Allow to Notify Job Result | Yes | *1 | Mandatory | ✓ | ✓ | |
| C4 | Allow to Execute Remote Job | Yes | *1 | Mandatory | ✓ | ✓ | |
| C5 | Notify User Details | No | *1 | Mandatory | ✓ | ✓ |
| *1: | When you configure settings on the screen, select an option from the list that is shown on the screen. |
4. Additional information other than Host Information
You can view both the Host Information and the following additional information on each screen where you edit the Host Information.
<Table> List of Fields for Additional Information other than Host Information
| No. | Field Name | Default Value | Setting Value | Specification | Remarks | Update | Distribute |
|---|---|---|---|---|---|---|---|
| D1 | Alias | Alphanumeric characters | Optional | Within 256 bytes | ✓ | ✓ | |
| D2 | Batch Distribution ID | Alphanumeric characters | *1 | - | ✓ |
| *1: | You are allowed only to view this field on the screen. |
| [Legend] | |
| Default Value | Value that is set for the field when you create a new management information record on a screen |
| Specification | Whether the specification is mandatory or optional when you update the management information record on a screen |
| Update | Register Host Information/Modify Host Information Record screen |
| Distribute | Collecting and Distributing System Management Information screen |
| ✓ | Availability of the field |
Explanation of Each Field
The following describes the fields that are configured in the Host Information.
For a field for which you select an option from the list, the following shows both the options that are displayed on the screen and the values that are described in the CSV file to be used for Collecting and Distributing System Management Information.
These fields are the basic settings for remote hosts for file transfer.
This field specifies the name of the host on the sending side or of the host on the receiving side.
For the Send processing, this host name is associated with the host name of the Transfer Group Information.
For the Receive processing, this host name is associated with the local host name on the sending side.
For a host that carries out file transfer via HULFT-HUB Server, specify the host name within 44 bytes.
| [Note] | Specify only alphanumeric characters for the host name. Although you can use specific symbols in order to ensure backward compatibility, HULFT may not operate correctly if you do so. |
This field specifies the host type for the host.
<Table> Setting Values for Host Type
| On-screen Options |
Values in CSV File |
Description |
|---|---|---|
| Mainframe | H | Mainframe |
| UNIX | U | UNIX/Linux/Nonstop |
| WindowsNT | N | WindowsNT operating system |
| Windows | W | Windows9x operating system |
| AS/400 | A | i5/OS |
| FujitsuK | K | Fujitsu K Series |
This field specifies the Kanji code type for the host.
<Table> Setting Values for Kanji Code Type
| On-screen Options |
Values in CSV File |
Description |
|---|---|---|
| SHIFT-JIS | S | SHIFT-JIS |
| JEF | J | JEF |
| EUC | E | EUC |
| IBM Kanji | I | IBM Kanji |
| KEIS | K | KEIS |
| NEC | N | NEC Kanji |
| UTF-8 | 8 | UTF-8 |
| [Note] | The Kanji code types that you can select vary depending on the host type and version of the host. |
This field specifies the JIS year for the Kanji code type.
<Table> Setting Values for JIS Year
| On-screen Options |
Values in CSV File |
Description |
|---|---|---|
| 78JIS | 78 | 78 JIS |
| 83JIS | 83 (default value) | 83 JIS |
This field specifies the port number that the Receive Acknowledge job uses.
If you omit this specification in the CSV file for Collecting and Distributing System Management Information, HULFT-HUB sets '30000.'
(A6) Request Acknowledge Port No.
This field specifies the port number that the Request Acknowledge job uses.
This field specifies the connection type of the host.
You can specify only 'LAN.'
(A8) Send Process Multiplex Level by Host
This field specifies the Send Process Multiplex Level for the host.
If you set '0,' HULFT does not apply the multiplex level of sending by host.
If you omit this field, HULFT-HUB sets '0.'
For the Send Process Multiplex Level by Host, set a value that is lower than the Send Job Multiplex Level in the System Environment Settings.
This field specifies the comment regarding the host.
| [Note] | If you enter double-byte codes on a screen in HULFT-HUB Manager, shift codes may be added to the double-byte codes when the information is registered on the client side. If the data exceeds 60 bytes when shift codes are added, HULFT will cut the data of the 61st byte and after. |
| [Remarks] | For clients that are running HULFT Ver.7.3.0 or higher, you can enter lowercase alphabetic characters. |
HULFT-HUB requires this information for file transfer via HULFT-HUB Server.
| [Note] | You cannot configure settings for connecting to HULFT FireWall on the Transfer Information screen. You can configure these settings only on the Register Host Information/Modify Host Information Record screen and the Collecting and Distributing System Management Information screen. |
(B1) Local Net Proxy Server Name
When used for file transfer via HULFT-HUB Server
This field specifies the host name for HULFT-HUB Server (Controlling Server) with a route closest to the client, of those servers that can relay the Send processing and the Receive processing.
| [Remarks] | If you register the Transfer definitions on the Transfer Information screen, HULFT-HUB automatically sets the host name of the Controlling Server based on the route settings. |
When used for file transfer not via HULFT-HUB Server
This field specifies the name of the server on which HULFT FireWall that is connected to your network is running.
HULFT requires this information to connect to HULFT FireWall from a local network.
When used for file transfer via HULFT-HUB Server
This field specifies the port number for HULFT-HUB Server (Controlling Server) with a route closest to the client, of those servers that can relay the Send processing and the Receive processing.
| [Remarks] | If you register the Transfer definitions on the Transfer Information screen, HULFT-HUB automatically sets the port number of the Controlling Server based on the route settings. |
When used for file transfer not via HULFT-HUB Server
This field specifies the port number that is used for HULFT FireWall connected to your network.
(B3) Global Net Proxy Server Name
When used for file transfer via HULFT-HUB Server
This field specifies the local host name.
| [Remarks] | If you register the Transfer definitions on the Transfer Information screen, HULFT-HUB automatically sets the local host name based on the route settings. |
When used for file transfer not via HULFT-HUB Server
This field specifies the name of the server on which HULFT FireWall for the network of the remote host is running.
HULFT requires this information to connect to HULFT FireWall from a global network (Internet).
(B4) Global Net Proxy Port No.
When used for file transfer via HULFT-HUB Server
This field specifies the Receive port number for the local host.
| [Remarks] | If you register the Transfer definitions on the Transfer Information screen, HULFT-HUB automatically sets the Receive Port No. for the local host based on the route settings. |
When used for file transfer not via HULFT-HUB Server
This field specifies the port number that is used for HULFT FireWall on the Global Net Proxy Server.
The user is notified of operations that are carried out.
(C1) Allow Send Request/Resend Request
This field specifies whether to acknowledge the services of the Send Request (SEND) and the Resend Request (RESEND).
<Table> Setting Values for Allow Send Request/Resend Request
| On-screen Options |
Values in CSV File |
Description |
|---|---|---|
| Yes | Y (default value) | Allow acknowledgement of service |
| No | N | Do not allow acknowledgement of service |
(C2) Allow to View Post-receive Job Result
This field specifies whether to acknowledge the service of the Post-receive Job Result Inquiry Request (HULJOB).
<Table> Setting Values for Allow to View Post-receive Job Result
| On-screen Options |
Values in CSV File |
Description |
|---|---|---|
| Yes | Y (default value) | Allow acknowledgement of service |
| No | N | Do not allow acknowledgement of service |
(C3) Allow to Notify Job Result
This field specifies whether to acknowledge the service of the Job Execution Result Notification (HULSNDRC).
<Table> Setting Values for Allow to Notify Job Result
| On-screen Options |
Values in CSV File |
Description |
|---|---|---|
| Yes | Y (default value) | Allow acknowledgement of service |
| No | N | Do not allow acknowledgement of service |
(C4) Allow to Execute Remote Job
This field specifies whether to acknowledge the service of the Remote Job Execution (HULRJOB).
<Table> Setting Values for Allow to Execute Remote Job
| On-screen Options |
Values in CSV File |
Description |
|---|---|---|
| Yes | Y (default value) | Allow acknowledgement of service |
| No | N | Do not allow acknowledgement of service |
This field specifies whether to send notification to the connection destination host for the user ID (operating system) and the user ID (Management Screen).
<Table> Setting Values for Notify User Details
| On-screen Options |
Values in CSV File |
Description |
|---|---|---|
| Yes | Y | Notify the host of the user IDs |
| No | N (default value) | Do not notify the host of the user IDs |
4. Additional information other than Host Information
This additional information is displayed together with the Host Information on each screen where you edit the Host Information. You can view and modify this information on screens in HULFT-HUB Manager.
This field specifies the alias for the host.
This field shows the Batch Distribution Information ID with which the Host Information is registered as distribution data (cannot be modified).
Points to be Noted When Configuring Settings
1. Using a FireWall environment together with HULFT-HUB environment
In order to carry out the Send processing and the Receive processing via HULFT-HUB Server, set the host name and the port number of the controlling HULFT-HUB Server in local network proxy information for HULFT-HUB.
You cannot use an environment that uses HULFT FireWall together with HULFT-HUB environment.
2. Host name that is used for transfer via HULFT-HUB Server
-
When you omit the Notification Host Name in the Registered Client Information
The host name in the Host Information that is used for transfer via HULFT-HUB Server varies according to the setting of the Notification Host Name for Transfer via HUB in the System Environment Settings of HULFT-HUB Server.
Notification Host Name for Transfer via HUB Host Name in Host Information Format with Port No. Host Name_Receive Port No. Format with Port No. for Controlled Clients Only Format without Port No. Host Name This is the case for the Host Information that is registered in HULFT-HUB Manager when you carry out the following operations:
- Switching to transfer via HULFT-HUB Server using the Route Batch Modification function - Registration of a client with 'Switch to HUB Transfer' specified - Creation of a Transfer definition for transfer via HULFT-HUB Server -
When you specify the Notification Host Name in the Registered Client Information
For the host name in the Host Information that is used for all transfers via HULFT-HUB Server, HULFT-HUB uses the name that you specify for the Notification Host Name.