Setting fields
The system environment settings file (huledenv.conf) contains the tag descriptions below.
|
Field name Tag name |
Can be |
Initial/ |
Setting value |
Screen where this item can be set |
|---|---|---|---|---|
|
Request acknowledge Port No. port |
No |
36000 (*1) |
0 or 1 to 65535 |
Managed Host Information screen Request acknowledge Port No. |
|
Local host kanji code type knjcode |
No |
Set Japanese: S Set English: 8 |
S E 8 |
System Environment Settings screen General tab Local host kanji code type |
|
Trace output mode trace_output_mode |
Yes |
0 |
0 1 2 3 9 |
System Environment Settings screen Operation log and trace log tab Output mode |
|
Trace changeover method trace_switch_mode |
Yes |
0 |
0 1 |
System Environment Settings screen Operation log and trace log tab Changeover method |
|
Trace changeover size trace_switch_size |
Yes |
10 |
10 to 100 |
System Environment Settings screen Operation log and trace log tab Maximum file size (MB) |
|
No. of trace generations retained trace_keep_cnt |
Yes |
10 |
1 to 99 |
System Environment Settings screen Operation log and trace log tab No. of generations retained |
|
Syslog or event log output syslog_output |
Yes |
0 |
0 1 |
System Environment Settings screen Operation log and trace log tab Event logs |
|
Trace directory log_dir |
No (*2) |
(*3) |
Up to 200 bytes |
System Environment Settings screen Operation log and trace log tab Trace log directory |
|
Work file directory work_dir |
No |
(*4) |
Up to 200 bytes |
－ |
|
Operation log to output (*10) opelog_output |
Yes |
000000 |
(#11) |
System Environment Settings screen Operation log and trace log tab Operation log to output |
|
Generate an error if the user ID and password are the same sec_userpass_same |
Yes |
N |
Y N |
System Environment Settings screen Security tab Generate an error if the user ID and password are the same |
|
Generate an error if the user ID consists only of numerals (0-9) sec_user_numonly |
Yes |
N |
Y N |
System Environment Settings screen Security tab Generate an error if the password consists only of numerals (0-9) |
|
Generate an error if the password consists only of numerals (0-9) sec_pass_numonly |
Yes |
N |
Y N |
System Environment Settings screen Security tab Generate an error if the password consists only of numerals (0-9) |
|
Generate an error if the user ID consists only of letters in the English alphabet (lowercase or uppercase) sec_user_alphaonly |
Yes |
N |
Y N |
System Environment Settings screen Security tab Generate an error if the user ID consists only of letters in the English alphabet (lowercase or uppercase) |
|
Generate an error if the password consists only of letters in the English alphabet (lowercase or uppercase) sec_pass_alphaonly |
Yes |
N |
Y N |
System Environment Settings screen Security tab Generate an error if the password consists only of letters in the English alphabet (lowercase or uppercase) |
|
Minimum number of characters in a password sec_pass_min |
Yes |
1 |
1 to 20 |
System Environment Settings screen Security tab Minimum number of characters in a password |
|
Output data processing log ed_log_output |
Yes |
1 |
0 1 |
System Environment Settings screen Data processing log tab Output to a shared system log |
|
Log entries retained log_del_border |
Yes |
0(*5) |
0 to 999999999 |
System Environment Settings screen Data processing log tab Log entries retained |
|
Output preference for error file log ed_err_output_level |
Yes |
0 |
0 1 2 |
System Environment Settings screen Data processing log tab Output preference |
|
Error file name ed_err_output_file |
Yes |
None (*6) |
Up to 200 bytes |
System Environment Settings screen Data processing log tab File name |
|
Output the content of DataMagic error files to syslog (in UNIX) or event logs (in Windows) ed_err_syslog_flag |
Yes |
0 |
0 1 |
System Environment Settings screen Data processing log tab Event logs |
|
Error file generation method ed_err_output_mode |
Yes |
R |
R M |
System Environment Settings screen Data processing log tab Output method |
|
Error file changeover size (MB) ed_err_switch_size |
Yes |
0 |
0 to 99 MB |
System Environment Settings screen Data processing log tab Maximum file size (MB) |
|
Log output format ed_err_format |
Yes |
None |
Up to 1024 bytes |
System Environment Settings screen Data processing log tab Output format |
|
Path of environment settings shared by HULFT products hulsharepath |
Yes |
None |
Up to 200 bytes |
System Environment Settings screen General tab Path of environment settings shared by HULFT products |
|
Local file lock mode localfile_lockmode |
Yes |
0 |
0 1 |
System Environment Settings screen General tab Local file lock mode |
|
Language huledlang |
Yes |
(*7) |
JPN ENG |
System Environment Settings screen General tab Language |
|
Date format datefmt |
Yes |
(*8) |
1 2 3 |
System Environment Settings screen General tab Date format |
|
Use multithreading for data transformation ed_use_thread |
Yes |
1 (*9) |
0 1 |
System Environment Settings screen General tab Use multithreading |
|
Limit of record group division in sort/merge algorithm ed_sort_merge_recordcount |
Yes |
5000000 (five million) |
500000 (five hundred thousand) to 999999999 (nine hundred ninety-nine million, nine hundred ninety-nine thousand, nine hundred and ninety-nine) |
System Environment Settings screen General tab Limit of record group division in sort/merge algorithm |
|
Encoding of input and output files cs4file |
Yes |
S |
S J E I K N 6 8 |
System Environment Settings screen General tab Encoding of input and output files |
|
Treat a line break as part of a field ed_csv_linebreak |
Yes |
1 (*9) |
0 1 |
System Environment Settings screen Data processing information settings tab Treat a line break as part of a field |
|
Escape enclosure characters inside an enclosed text ed_csv_enclosefields |
Yes |
1 (*9) |
0 1 |
System Environment Settings screen Data processing information settings tab Escape enclosure characters inside an enclosed text |
|
Treat a null character as part of a field ed_fmt_null_flag |
Yes |
1 (*9) |
0 1 |
System Environment Settings screen Data processing information settings tab Treat a null character as part of a field |
|
Use control characters inside a fixed value ed_fixvalue_ctrlchar_flag |
Yes |
1 (*9) |
0 1 |
System Environment Settings screen Data processing information settings tab Use control characters inside a fixed value |
|
Allow field type differences during data comparison compare_different_type_data |
Yes |
1 (*9) |
0 1 |
System Environment Settings screen General tab Allow field type differences during data comparison |
|
Treat a prefix and a dot within a table name as a schema qualifier treat_dot_as_schema |
Yes |
1 (*9) |
0 1 |
System Environment Settings screen General tab Treat a prefix and a dot within a table name as a schema qualifier |
|
Japanese era name era_name |
Yes |
(*12) |
Up to 200 bytes |
Cannnot be set on the |
Legend:
Yes: Can be omitted.
No: Cannot be omitted.
|
*1 |
: |
For the DataMagic Desktop grade, the Request acknowledge port No. (port) is set to 0.Do not change this value. |
|
*2 |
: |
If the trace output mode is "0", the trace directory (log_dir) can be omitted. |
|
*3 |
: |
The initial value of the trace directory (log_dir) is DataMagic-installation-folder\log. |
|
*4 |
: |
The initial value of the work file directory (work_dir) is DataMagic-installation-folder\work. |
|
*5 |
: |
Upon installation, the value of the log entries retained (log_del_border) is "10000". |
|
*6 |
: |
Upon installation, the value of the error file name (ed_err_output_file) is race-directory\errfile.txt. |
|
*7 |
: |
The initial value of the language (huledlang) is the language specified when DataMagic is installed. If you omit the value, it will work as ENG. |
|
*8 |
: |
The initial date format (datefmt) is the date format specified when DataMagic is installed.If you omit the value, it will work as YMD (1). |
|
*9 |
: |
If an update installation from HULFT-DataMagic Ver. 2 or earlier is performed, the initial/default value is "0". |
|
*10 |
: |
You cannot use the Operation Log for the DataMagic Desktop grade. |
| *11 |
You can specify each operation type by using a six digit number made up of "0"s and "1"s. The digits of the number represent the "Reference", "Register", "Delete", "Execute", "Import/Export", and "Start/Stop resident process" operations from left to right respectively. 0: Do not output logs related to the operation 1: Output logs related to the operation |
|
| *12 |
For new installation: "20190501,R,令和" is set as the initial value. For update installation:
If you omit the value for the Japanese era name (era_name) when executing data processing, the era names for dates on or after January 8, 1989 are handled as "平成" (Heisei). |